Paul West Paul West's Profile Page

Paul West Paul West

0 Course Enrolled • 0 Course Completed

Biography

Fortinet - Unparalleled NSE7_EFW-7.2 - Fortinet NSE 7 - Enterprise Firewall 7.2 Associate Level Exam

BONUS!!! Download part of Itcertkey NSE7_EFW-7.2 dumps for free: https://drive.google.com/open?id=1gj_MXuf2QW4WfSJlkJ3vplqNWyrRbBHw

The Itcertkey is one of the leading Fortinet NSE7_EFW-7.2 exam preparation study material providers in the market. The Itcertkey offers valid, updated, and real Fortinet NSE 7 - Enterprise Firewall 7.2 NSE7_EFW-7.2 exam practice test questions that assist you in your NSE7_EFW-7.2 Exam Preparation. The Fortinet NSE7_EFW-7.2 exam questions are designed and verified by experienced and qualified Fortinet exam trainers.

Fortinet NSE7_EFW-7.2 Exam Syllabus Topics:

Topic
Details

Topic 1

System configuration: This topic discusses Fortinet Security Fabric and hardware acceleration. Furthermore, it delves into configuring various operation modes for an HA cluster.

Topic 2

Security profiles: Using FortiManager as a local FortiGuard server is discussed in this topic. Moreover, it delves into configuring web filtering, application control, and the intrusion prevention system (IPS) in an enterprise network.

Topic 3

VPN: Implementing IPsec VPN IKE version 2 is discussed in this topic. Additionally, it delves into implementing auto-discovery VPN (ADVPN) to enable on-demand VPN tunnels between sites.

Topic 4

Central management: The topic of Central management covers implementing central management.

Topic 5

Routing: It covers implementing OSPF to route enterprise traffic and Border Gateway Protocol (BGP) to route enterprise traffic.

>> NSE7_EFW-7.2 Associate Level Exam <<

NSE7_EFW-7.2 Test Vce Free, NSE7_EFW-7.2 Exam Cram Review

This Fortinet braindump study package contains NSE7_EFW-7.2 latest questions and answers from the real NSE7_EFW-7.2 exam. These questions and answers are verified by a team of professionals and the content of this NSE7_EFW-7.2 braindump is taken from the real exam. Since we are 100% sure of the content we provide a Money Back Guarantee offer! We belive taht NSE7_EFW-7.2 Braindumps can help you pass your NSE7_EFW-7.2 exam with minimal effort.

Fortinet NSE 7 - Enterprise Firewall 7.2 Sample Questions (Q52-Q57):

NEW QUESTION # 52
Exhibit.

Refer to the exhibit, which contains a partial policy configuration.
Which setting must you configure to allow SSH?

A. Select an application control profile corresponding to SSH in the Security Profiles section
B. Include SSH in the Application field
C. Specify SSH in the Service field
D. Configure pot 22 in the Protocol Options field.

Answer: B

Explanation:
* Option A is correct because to allow SSH, you need to specify SSH in the Service field of the policy configuration. This is because the Service field determines which types of traffic are allowed by the policy1. By default, the Service field is set to App Default, which means that the policy will use the default ports defined by the applications. However, SSH is not one of the default applications, so you need to specify it manually or create a custom service for it2.
* Option B is incorrect because configuring port 22 in the Protocol Options field is not enough to allow SSH. The Protocol Options field allows you to customize the protocol inspection and anomaly protection settings for the policy3. However, this field does not override the Service field, which still needs to match the traffic type.
* Option C is incorrect because including SSH in the Application field is not enough to allow SSH. The Application field allows you to filter the traffic based on the application signatures and categories4.
However, this field does not override the Service field, which still needs to match the traffic type.
* Option D is incorrect because selecting an application control profile corresponding to SSH in the Security Profiles section is not enough to allow SSH. The Security Profiles section allows you to apply various security features to the traffic, such as antivirus, web filtering, IPS, etc. However, this section does not override the Service field, which still needs to match the traffic type. References: =
* 1: Firewall policies
* 2: Services
* 3: Protocol options profiles
* 4: Application control

NEW QUESTION # 53
Refer to the exhibit, which shows two configured FortiGate devices and peering over FGSP.

The main link directly connects the two FortiGate devices and is configured using the set session-syn-dev <interface> command.
What is the primary reason to configure the main link?

A. To load balance both sessions and configuration synchronization between layer 2 and 3
B. To have both sessions and configuration synchronization in layer 2
C. To have only configuration synchronization in layer 3
D. To have both sessions and configuration synchronization in layer 3

Answer: D

Explanation:
The primary purpose of configuring a main link between the devices is to synchronize session information so that if one unit fails, the other can continue processing traffic without dropping active sessions.
A).To have both sessions and configuration synchronization in layer 2.This is incorrect because FGSP is used for session synchronization, not configuration synchronization.
B).To load balance both sessions and configuration synchronization between layer 2 and 3.FGSP does not perform load balancing and is not used for configuration synchronization.
C).To have only configuration synchronization in layer 3.The main link is not used solely for configuration synchronization.
D).To have both sessions and configuration synchronization in layer 3.The main link in an FGSP setup is indeed used to synchronize session information across the devices, and it operates at layer 3 since it uses IP addresses to establish the peering.

NEW QUESTION # 54
Refer to the exhibit, which contains a partial BGP combination.

You want to configure a loopback as the OGP source.
Which two parameters must you set in the BGP configuration? (Choose two)

A. update-source
B. ibgp-enfoce-multihop
C. ebgp-enforce-multihop
D. recursive-next-hop

Answer: A,C

Explanation:
To configure a loopback as the BGP source, you need to set the "ebgp-enforce-multihop" and
"update-source" parameters in the BGP configuration. The "ebgp-enforce-multihop" allows EBGP connections to neighbor routers that are not directly connected, while "update-source" specifies the IP address that should be used for the BGP session.

NEW QUESTION # 55
Exhibit.

Refer to the exhibit, which shows an ADVPN network.
The client behind Spoke-1 generates traffic to the device located behind Spoke-2.
Which first message floes the hub send to Spoke-110 bring up the dynamic tunnel?

A. Shortcut reply
B. Shortcut forward
C. Shortcut offer
D. Shortcut query

Answer: D

Explanation:
In an ADVPN scenario, when traffic is initiated from a client behind one spoke to another spoke, the hub sends a shortcut query to the initiating spoke. This query is used to determine if there is a more direct path for the traffic, which can then trigger the establishment of a dynamic tunnel between the spokes.

NEW QUESTION # 56
Refer to the exhibit, which shows a network diagram.

Which IPsec phase 2 configuration should you impalement so that only one remote site is connected at any time?

A. Set route-overlap to either use-new or use-old
B. Set net-device to enable
C. Set route-overlap to allow.
D. Set single-source to enable

Answer: A

Explanation:
To ensure that only one remote site is connected at any given time in an IPsec VPN scenario, you should use route-overlap with the option to either use-new or use-old. This setting dictates which routes are preferred and how overlaps in routes are handled, allowing for one connection to take precedence over the other (C).

NEW QUESTION # 57
......

The NSE7_EFW-7.2 certification exam is one of the top-rated career advancement certifications in the market. This Fortinet NSE 7 - Enterprise Firewall 7.2 (NSE7_EFW-7.2) exam dumps have been inspiring beginners and experienced professionals since its beginning. There are several personal and professional benefits that you can gain after passing the Fortinet NSE7_EFW-7.2 Exam. The validation of expertise, more career opportunities, salary enhancement, instant promotion, and membership of Fortinet certified professional community.

NSE7_EFW-7.2 Test Vce Free: https://www.itcertkey.com/NSE7_EFW-7.2_braindumps.html

BTW, DOWNLOAD part of Itcertkey NSE7_EFW-7.2 dumps from Cloud Storage: https://drive.google.com/open?id=1gj_MXuf2QW4WfSJlkJ3vplqNWyrRbBHw

Paul West Paul West

Biography

All Courses

Follow Our Page

Pay Us: